Repairing Your Own Machine Components

Home
>
Home Improvement
>
Repairing Your Own Machine Components

Repairing Your Own Machine Components

Many industrial concerns have workshops of their own. For the repair of worn shafts, the lathe machine is excellent. Keyway slots can be machined by using a milling machine, while a shaping machine can do machining of large flat areas. A drilling machine does drilling of holes.

A skilled Maintenance Engineer should know how to use all these machines in order to make his own repairs in a safe manner. Very often he has to supervise machinists. The information below should be useful for that purpose.

Lathe Machine

The lathe machine uses a single-point-cutting tool for a variety of turning, facing, and drilling jobs. Excess metal is removed by rotating the work piece over the fixed cutting tool to form straight or tapered cylindrical shapes, grooves, shoulders and screw threads. It can also be used for facing flat surfaces on the ends of cylindrical parts.

The work piece is clamped onto a horizontal rotating shaft by a 3-jaw or 4-jaw chuck. The latter chuck can be used to cut off-centered cylinders. The rotating horizontal spindle to which the chuck is attached is usually driven at speeds that can be varied.

The cutting tool is fixed onto a tool rest and manipulated by hand. It can also be power driven on straight paths parallel or perpendicular to the work axis. This is useful for screw cutting.

Internal turning known as boring results in the enlargement of an already existing hole. The holes are more accurate in roundness, concentricity, and parallelism than drilled holes. A hole is bored with a single-point-cutting tool that feeds along the inside of the work piece.

Shaping Machine

The shaping machine is used to machine flat surfaces, grooves, shoulders, T-slots, and angular surfaces with single-point tools. The cutting tool on the shaper oscillates, cutting on the forward stroke, with the work piece feeding automatically toward the tool during each return stroke.

Drilling Machine

The drilling machine is used to cut holes in metal with a twist drill. By changing the cutting tool, they can be used to do reaming, boring, counter boring, countersinking, and threading.

Milling Machine

The milling machine uses a rotating cutting tool to cut flat surfaces, grooves, and shoulders, inclined surfaces, dovetails, and T-slots. Cutters of many shapes are changed to cut different grooves.

Cutting Tools

Metal-cutting tools are classified as single point or multiple point. The lathe and shaping machine use single point cutting tool while the milling and drilling machines use multiple-point-cutting tools.

Metal is cut either by moving the work piece like in the lathe or by moving the tool like in the shaping machine, drilling or milling machine. Clearance angles must be provided to prevent the tool surface below the cutting edge from rubbing against the work piece. Rake angles are often provided on cutting tools to cause a wedging action in the formation of chips and to reduce friction and heat.

Tool Materials

In order to remove chips from a work piece, a cutting tool must be harder than the work piece and must maintain a cutting edge at the temperature produced by the friction of the cutting action.

Carbon Steel

Carbon steel tools even though comparatively inexpensive tend to lose cutting ability at temperatures around 400 degree F (205 degree C).

High-Speed Steel

High-speed steel, containing 18 percent tungsten, 4 percent chromium, 1 percent vanadium, and only 0.5 to 0.8 percent carbon, permits the operation of tools twice or three times the speeds allowable with carbon steel

Cast Alloys

Cast-alloy cutting-tool materials containing cobalt, chromium, and tungsten are effective in cutting cast iron and retaining their cutting ability even when red hot.

Cemented Tungsten Carbide

The hardness of Tungsten Carbide approaches that of a diamond. Tungsten carbide tools can be operated at cutting speeds many times higher than those used with high-speed steel.

Oxides

Ceramic, or oxide, tool tips consist primarily of fine aluminum oxide grains, which are bonded together. These are very hard.

Cutting fluids

An overheated tool can become blunt and soft very fast. Therefore very often, cooling fluids cools the cutting points of the tool. This serves to lubricate and cool.

Water is an excellent cooling medium, but it corrodes ferrous materials. Sulfurized mineral oil is one of the most popular coolants as it can both cool as well as lubricate. The sulfur prevents chips from the work from melting on to the tip of the tool.

Move Closer To Financial Freedom!

Best selling author of the megahits Nothing Down and Creating Wealth, shares the secret of success. Generate wealth and profit over $100,000 a year - on a part time basis, working from your home, on found money - using little or none of your own money. http://www.free-marine.com/linkoneminmil lionaire.htm

Many years of working experience in Marine, Facilities, Construction has given the author material for writing e-books and articles related to engineering, and management. Subscribe to facworld ezine at mailto:facworld-subscribe@yahoogroups.com More information at http://www.free-marine.com and http://www.free-engineering.com

In The News:

Yahoo! News: Top Stories

Gaza fighting rages despite cease-fire proposal (AP)

AP - Israel resumed its Gaza offensive Wednesday, bombing heavily around suspected smuggling tunnels near the border with Egypt after a three-hour lull to allow in humanitarian aid. Hamas responded with a rocket barrage.

Obama taps spending watchdog, eyes Social Security (AP)

AP - Pointing with concern to "red ink as far as the eye can see," President-elect Barack Obama pledged Wednesday to tackle out-of-control Social Security and Medicare spending and named a special watchdog to clamp down on other federal programs Â— even as he campaigned anew to spend the largest pile of taxpayer money in history to revive the sinking economy.

Senate Democrats yield to Obama, retreat on Burris (AP)

AP - Senate Democrats beat a hasty retreat Wednesday from their rejection of Roland Burris as President-elect Barack Obama's successor, yielding to pressure from Obama himself and from senators irked that the standoff was draining attention and putting them in a bad light. Burris said with a smile he expected to join them "very shortly."

Melting snow causes heavy flooding in Wash. state (AP)

AP - Rain and high winds lashed Washington state Wednesday, causing widespread avalanches, mudslides, flooding and road closures as the heavy snowfall that has buried parts of the state began to rapidly melt.

Obama hails 'extraordinary' moment with presidents (AP)

AP - Confronting a grim economy and a Middle East on fire, Barack Obama turned Wednesday to perhaps the only people on the planet who understand what he's in for: the four living members of the U.S. presidents' club.

Feds say inauguration attractive terrorist target (AP)

AP - The upcoming inauguration of Barack Obama is an attractive target for international and domestic terrorists, but U.S. intelligence officials have no information about specific threats to the Jan. 20 event.

Drug made from genetically engineered goats may become scientific first (AP)

AP - You've heard of making cheese from goats' milk, but prescription drugs? In what would be a scientific first, an anti-clotting drug made from the milk of genetically engineered goats moved closer to government approval Wednesday after experts at the Food and Drug Administration reported that the medication works and its safety is acceptable.

DeGeneres wins at People's Choice Awards (AP)

AP - Ellen DeGeneres and "Dancing with the Stars" were early winners at the People's Choice Awards.

Lin leads Harvard to 82-70 upset over No. 17 BC (AP)

AP - Jeremy Lin scored 27 points to lead Harvard to an 82-70 upset over No. 17 Boston College on Wednesday night, three days after the Eagles upset previously top-ranked North Carolina.

AP source: Browns to hire Eric Mangini as coach (AP)

AP - Eric Mangini is the new head coach of the Cleveland Browns, a week after being fired by the New York Jets. A person with knowledge of the negotiations told The Associated Press that Mangini will be introduced Thursday at a news conference at the team's headquarters in Berea.

Israel bombards Gaza, U.S. backs ceasefire plan (Reuters)

Reuters - Israeli warplanes bombed the Gaza Strip on Thursday and tanks pounded Palestinian guerrillas on the ground as U.S. backing for a proposed truce raised expectations of an end to the offensive.

Senate Democrats move to seat Burris (Reuters)

Reuters - In an abrupt switch, Democratic leaders began talks on Wednesday to swear in Roland Burris, appointed by embattled Illinois Gov. Rod Blagojevich to replace President-elect Barack Obama in the U.S. Senate.

Budget deficit to hit $1.2 trillion in fiscal 2009 (Reuters)

Reuters - The U.S. budget deficit will swell to a record $1.186 trillion in fiscal 2009, congressional forecasters said on Wednesday, the result of an economic recession that has cut tax receipts and caused massive government bailouts of banks and automakers.

Mumbai-like attack could happen in U.S.: Bush aide (Reuters)

Reuters - U.S. cities are vulnerable to an attack like the gun-and-grenade assault that terrorized Mumbai for three days and killed 179 people, the White House homeland security adviser said on Wednesday.

"Enemy combatant" will be early test for Obama (Reuters)

Reuters - The case of Ali al-Marri, accused of being an al Qaeda "sleeper" agent and held for 5-1/2 years at a U.S. military prison in South Carolina, will be an early test for President-elect Barack Obama.

Salmonella outbreak sickens 388 across U.S.: health officials (Reuters)

Reuters - An outbreak of salmonella food poisoning has made 388 people sick across 42 states, sending 18 percent of them to the hospital, U.S. health officials said on Wednesday.

U.S. presses to jail Madoff on diamonds, watches mail (Reuters)

Reuters - Accused swindler Bernard Madoff should be jailed for violating a court order by mailing $1 million worth of diamonds, watches and other jewelry to friends and family, U.S. prosecutors told a court on Wednesday.

Russia, Ukraine take gas row case to Europe (Reuters)

Reuters - Russia and Ukraine argue their case to Europe on Thursday in a gas price dispute that has choked off energy supplies to EU countries beset by bitter winter weather.

Israel approves tougher war on Hamas (AFP)

AFP - Israel on Wednesday approved an even tougher war on Hamas, warning residents to flee southern Gaza ahead of planned bombing of cross-border tunnels, as the Palestinian death toll passed 700.

Russia, Ukraine in EU talks as gas crisis engulfs Europe (AFP)

AFP - Envoys from Russia and Ukraine go to Brussels on Thursday for emergency EU-brokered talks to resolve a bitter gas fight between the two ex-Soviet giants that has engulfed Europe in a major energy crisis.

Repairing Your Own Machine Components

Home Improvement Home Improvement